HP 1920-16G Switch - JG923A - Gigabit MANAGED SWITCH L2/L3
Mã SP:JG923ALượt xem: 3324
HP 1920-16G Switch - JG923A
Ports : 16 autosensing 10/100/1000 ports; 4 Gigabit SFP ports, dual-purposed with 4 of the 10/100/1000 ports.
Memory and processor ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB.
Performance : 100 Mb Latency < 5 µs; 1000 Mb Latency < 5 µs; Throughput up to 29.8 million pps; Routing/Switching capacity 40 Gbps; Routing table size 32 entries.
Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability.
Layer 3 services : Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network; DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets.
Layer 3 routing : NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing.
<p>HP 1920-16G Switch - JG923A </p><p> Ports : 16 autosensing 10/100/1000 ports; 4 Gigabit SFP ports, dual-purposed with 4 of the 10/100/1000 ports. </p><p> Memory and processor ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB. </p><p> Performance : 100 Mb Latency < 5 µs; 1000 Mb Latency < 5 µs; Throughput up to 29.8 million pps; Routing/Switching capacity 40 Gbps; Routing table size 32 entries. </p><p> Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability. </p><p> Layer 3 services : Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network; DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets. </p><p> Layer 3 routing : NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing.</p>